Toshiba TECRA M10 Maintenance Manual page 262

4 Replacement Procedures
7. Remove the following screw and slide the KB support plate in the direction as
shown in the figure below to remove.
•
M2.5×10B
8. Disconnect the keyboard flexible cable from the connector CN3230 on the system
board and remove the keyboard.
CN3230
4-30 [CONFIDENTIAL]
FLAT HEAD screw
KB support plate
Figure 4-17 Removing the keyboard (2)
×1
×
M2.5 10B FLAT HEAD
Keyboard flexible cable
TECRA M10 Maintenance Manual (960-685)
4.9 Keyboard
Keyboard