Installing The Lcd Bezel; Figure 4.38 Unhooking The Hinge Caps From The Lcd Hinges - Toshiba M645-S4080 Maintenance Manual

4.20 LCD Bezel
6. Remove the hinge caps from the LCD hinges and remove the LCD bezel from the LCD
cover assembly.

Installing the LCD Bezel

Install the LCD bezel according to the following procedures.
NOTE:
Take care not to pinch the antenna cables. Make sure the routing positions of the antennas are
correct and do not block any components, such as screw holes.
1. Place the LCD bezel on the LCD cover assembly. Make sure the hinge caps fit over the
LCD hinges and the tabs on the back of the LCD bezel align with the slots in the LCD
cover assembly.
2. Press down on the LCD bezel, starting from the bottom edge and toward the sides and top
edge. Make sure the bezel clicks into place.
3. Secure the LCD bezel to the LCD cover assembly with four M2.5x4 screws, as indicated
in Figure 4.36.
4. Adhere the four screw rubbers to the screws.
Satellite M600/M640/M645/M647 Maintenance Manual
Downloaded from LpManual.com Manuals

Figure 4.38 Unhooking the hinge caps from the LCD hinges

4 Replacement Procedures
4-55