Rgb Monitor Id - Toshiba TECRA M10 Maintenance Manual

3.16 Expansion Test
Subtest 02

RGB monitor ID

NOTE: To execute this subtest, monitor supporting EDID (Extended Display
Identification Data) is required.
Connect a wraparound connector to CRT monitor for the test of ID acquisition.
This subtest is executed by using VESA command.
CAUTION: It becomes NG because the priority is given to the internal monitor in a
simultaneous display mode.
TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL]
3 Tests and Diagnostics
]3-33