Battery Pack; Removing The Battery Pack - Toshiba TECRA M10 Maintenance Manual

4.2 Battery pack

4.2 Battery pack

Removing the Battery pack

To remove the battery pack, follow the steps below and refer to Figure 4-1.
CAUTION: Take care not to short circuit the terminals when removing the battery pack.
Similarly, do not drop, knock, scratch, disassemble, twist, or bend the
battery pack.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and other external devices from the computer.
3. Turn the computer face down.
4. Release the battery lock and remove the battery pack while sliding the battery
release latch as shown in the figure below.
Battery pack
Battery lock
NOTE: Dispose of the used battery pack in accordance with the laws and ordinances of
your local authority.
TECRA M10 Maintenance Manual (960-685)
Figure 4-1 Removing the battery pack
4 Replacement Procedures
Battery release latch
[CONFIDENTIAL] 4-11