Removing The Memory Module - Toshiba TECRA M10 Maintenance Manual

4 Replacement Procedures
4.5 Memory module

Removing the Memory module

To remove the memory module, confirm that the computer is shut down. Then follow the
steps below and refer to Figure 4-7 and 4-8.
CAUTION: When removing the memory module, make sure the computer is powered off.
Removing a memory module with the power on might damage the module or
the computer itself.
Do not touch the connectors on the memory module or on the computer.
Dust and stains on the connectors may cause memory access problems.
Never press hard or bend the memory module.
1. Turn over the computer.
2. Loosen the screw fixing the memory cover.
3. Remove the memory cover.
4-18 [CONFIDENTIAL]
Memory cover
Figure 4-7 Removing the memory cover
Screw
TECRA M10 Maintenance Manual (960-685)
4.5 Memory module