Specifications; Introduction; Hardware Specifications; Dimensions And Weights - HP Integrity cx2600 Maintenance Manual

8 Specifications

Introduction

This chapter provides the power requirements, operating conditions (environmental
requirements), physical requirements, hardware specifications, and video resolutions of the hp
Integrity cx2600 Server. The following tables provide the specifications required for normal
operation of the hp Integrity cx2600 Server.
NOTE:
The specifications and requirements for the power supply and environment can vary
if you install a mass storage device in the server that has more stringent environmental limits
than required for the HP Server. Ensure that the operating environment for any mass storage
devices you intend to install are compatible with the server environmental requirements.

Hardware Specifications

Table 8-1 Hardware Specifications
Micro-processors
Memory
LAN
PCI Slots
Core I/O
DVD-ROM
Mass Storage
External Storage
Power Supply

Dimensions and Weights

This section provides dimensions and weights of hp Integrity cx2600 Server components.
Table 8-2 Server Component Dimensions
Dimension
Height
Width
Depth
Weight
166 Specifications
Intel® Itanium® (1 or 2 processors):
1.3 GHz/3 MB.
Supports up to 12 Double Data Rate (DDR) registered
ECC Memory, in PC1600 DIMMs. Supported DDR DIMM
sizes: 128 MB, 256 MB, 513 MB, 1 GB, and 2 GB. Requires
DIMMs to be added in quads of equal capacity.
1 GB 10/100 MB, (and 10/100 MB management LAN).
Four 64-bit PCI slots, 133 MHz slots.
Three serial ports, 2 USB ports, integrated RJ-45 LAN,
and 1 ea. for keyboard and mouse.
DVD-R/CD-ROM drive; IDE interface; 48x speed.
Maximum internal storage: three 73 MB, 15K drive.
2 external SCSI ports.
1+1 (redundant) configuration. Under normal operating
conditions, the two power supplies share the load.
6.71 (173)
17.32 (440)
20 (508)
Unloaded 62 (28.1)
Fully loaded 70 (31.75)
Value