Troubleshooting Using Offline Support Tools; Offline Diagnostic Environment (Ode); E-Diag Tools - HP Integrity cx2600 Maintenance Manual

Table 4-7 I/O Card Slot Paths
I/O Slot
Slot 1
Slot 2
Slot 3
Slot 4
Note: Rope 7 is used to access optional ECI at 33 MHz.

Troubleshooting Using Offline Support Tools

You can use offline support tools to troubleshoot the server.
• Offline Diagnostic Environment (ODE): Available on IPF Offline Diagnostics on the resource
CD that comes with the server.
• E-DiagTools—available from IPF Offline Diagnostics on the resource CD that comes with
your server.
• Management Processor MP event logs: Available by logging on to the MP through the MP
LAN or MP remote serial connectors.

Offline Diagnostic Environment (ODE)

ODE is used to evaluate specific hardware components through a command line interface. To
access ODE from the IPF Offline Diagnostics CD, follow these steps:
1. Power on the server and insert the IPF Offline Diagnostics CD into the DVD.
2. Do not permit the server to boot into an operating system. At the EFI Boot Manager, select
the EFI Shell.
3. Determine which file system represents the CD. Enter the appropriate command to access
the CD.

E-Diag Tools

E-DiagTools is used to evaluate the hardware integrity of your HP Server. To access E-DiagTools
from the IPF Offline Diagnostic CD, perform the following steps:
1. Power on your hp server and insert the IPF Offline Diagnostics CD into the DVD-ROM tray.
2. Do not permit the server to boot into an operating system and at the EFI Boot Manager,
select EFI shell.
3. Determine the file system that represents the CD and enter the appropriate command to
access the CD.
4. After accessing the CD diagnostic menu, launch e-Diagtools for IPF and run the Basic and
Advanced tests according to the menus.
Acpi(HWP0002,400)/Pci(1|0)
Acpi(HWP0002,300)/Pci(1|0)
Acpi(HWP0002,200)/Pci(1|0)
Acpi(HWP0002,600)/Pci(1|0)
Path
Troubleshooting Using Offline Support Tools
Rope MHz
4, 5 133
3 133
2 133
6 133
67