Accessing The Logs With Mp Commands; Disk And I/O Path Logging - HP Integrity cx2600 Maintenance Manual

Accessing the Logs with MP Commands

The SEL and FPL data can also be accessed from the MP logs using the MP card SL command.
The SDM (set display mode) command determines the format of the display:
• raw hex mode.
• text mode.
• keyword mode.
Hex Mode Example:
33 0x203E5F914A0200E0 FFFF010944080300
14 0x5680006300E000F0 010000003E5F914A
14 0x5680006300E000F0 0000000000000000
15 0x203E5F914B020110 FFFF027000120300
Text Mode Example:
Log Entry 13: 28 Feb 2003 16:41:46
Alert Level 2: Informational
Keyword: Type-02 080901 526593
Power supply turned on
Logged by: BMC; Sensor: Power Supply - Pwr Spply 1 Ctrl
Data1: Device Enabled
0x203E5F914A0200E0 FFFF010944080300
Log Entry 14: 28 Feb 2003 16:41:46
Alert Level 2: Informational
Keyword: BOOT_START
CPU starting boot
Logged by: System Firmware 0
Data: Implementation dependent data field
0x5680006300E000F0 0000000000000000
Log Entry 15: 28 Feb 2003 16:41:47
Alert Level 2: Informational
Keyword: Type-02 127002 1208322
Soft Reset
Logged by: BMC; Sensor: System Event
0x203E5F914B020110 FFFF027000120300
Keyword Mode Example:
13 BMC 2 0x203E5F914A0200E0 FFFF010944080300 Type-02 080901 526593
14 SFW 0 2 0x5680006300E000F0 0000000000000000 BOOT_START
15 BMC 2 0x203E5F914B020110 FFFF027000120300 Type-02 127002 1208322

Disk and I/O Path Logging

Some failures result in I/O path logging. These paths help to indicate the source of the error and
can be included in the error message or logged into console or event logs.
describe the disk drive and PCI-X slot paths for the server.
Table 4-6 Disk and DVD Device Paths
Device Slot
Slot 0
Slot 1
Slot 2
DVD
66 Troubleshooting
28 Feb 2003 16:41:46
28 Feb 2003 16:41:46
28 Feb 2003 16:41:47
Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
Acpi(HWP0002,100)/Pci(1|0))/Scsi(Pun1,Lun0)
Acpi(HWP0002,100)/Pci(1|1))/Scsi(Pun2,Lun0)
Acpi(HWP0002,0)/Pci(2|0))/Ata(Primary,Master)
Path
Table 4-6 and Table 4-7
Rope MHz
1 66
1 66
1 66
0 33