Table of Contents
Advertisement
Callout
1
2
3
4
5
6
7
8
9
10
11
Specifications
There are optimium environment and technical specifications for the HPE SimpliVity 380. The specifications help you when
planning the appropriate installation location, environmental conditions, and resources such as power and cooling. See the
product QuickSpecs for the latest information on system specifications.
Item
PCIe Slots 1 and 2
PCIe Slot 3
10 GbE FlexLOM
USB connectors
iLO port
PCIe Slot 4-6
4 port 1 GbE LOM
Video port
Serial port
Dual power supplies
Boot drives
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Description
For all server models except the HPE
SimpliVity 380 Gen10 G and the HPE
SimpliVity 380 Gen10 H, the Accelerator
card is installed in this slot. Both indicator
LEDs on the card emit solid green contin-
uously to indicate normal operation.
Note: The HPE SimpliVity 380
Gen10 G and HPE SimpliVity
380 Gen10 H server models
use software-enabled dedupli-
cation and compression and do
not support an Accelerator
card. For Gen10 G and Gen10
H (LFF only), PCIe slots 1 and
2 are available. For Gen10 H
SFF, slot 1 is used for the
E208i-p Boot Drive Controller
and is not available.
For all platforms except Gen10 H SFF,
this slot contains the Boot Drive Con-
troller (E208i-p). For Gen10 H SFF this
slot is utilized by the SAS Expander.
10 GbE FlexLOM (SFP+ model shown).
Dual USB 3.0 connectors enable you to
connect a USB device, such as a mouse
or keyboard.
Dedicated iLO5 management port.
Optional Secondary PCIe riser (requires
second CPU).
Embedded 4-port 1 GbE LOM. Note that
this feature may not be available based
on system configuration.
Use to connect a VGA monitor for local
access.
Optional serial port connector.
Dual Power Supplies for HA power (800
W auto-sense or 1600 W 220V).
Redundant (RAID1) 300 GB Boot drives.
Component identification 11
Advertisement
Table of Contents
