Iscsi Connection Attributes Table - Brocade Communications Systems Brocade 8/12c Reference

12

iSCSI connection attributes table

iSCSI connection attributes table
The isciConnectionAttributesTable contains a list of active connections within each session.
Object and OID
iscsiConnectionAttributesTable
1.3.6.1.2.1.142.1.1.11.1
iscsiConnectionAttributesEntry
1.3.6.1.2.1.142.1.1.11.1.1
iscsiCxnIndex
1.3.6.1.2.1.142.1.1.11.1.1.1
iscsiCxnCid
1.3.6.1.2.1.142.1.1.11.1.1.2
iscsiCxnState
1.3.6.1.2.1.142.1.1.11.1.1.3
iscsiCxnAddrType
1.3.6.1.2.1.142.1.1.11.1.1.4
iscsiCxnLocalAddr
1.3.6.1.2.1.142.1.1.11.1.1.5
iscsiCxnProtocol
1.3.6.1.2.1.142.1.1.11.1.1.6
iscsiCxnLocalPort
1.3.6.1.2.1.142.1.1.11.1.1.7
iscsiCxnRemoteAddr
1.3.6.1.2.1.142.1.1.11.1.1.8
iscsiCxnRemotePort
1.3.6.1.2.1.142.1.1.11.1.1.9
iscsiCxnMaxRecvDataSegLeng
th
1.3.6.1.2.1.142.1.1.11.1.1.10
252
Access Description
Not A list of connections belonging to each iSCSI instance present on the
accessible system.
Not An entry containing management information applicable to a
accessible particular connection.
Not An arbitrary integer that uniquely identifies a particular node within
accessible an iSCSI instance present on the local system. This value is not
accessible. This index value must not be modified or reused by an
agent unless a reboot has occurred. Agents should attempt to keep
this value persistent across reboots.
Read only The iSCSI connection ID for this connection.
Read only The current state of this connection, from an iSCSI negotiation point
of view. Here are the states:
•
login - The transport protocol connection has been established,
but a valid iSCSI login response with the final bit set has not
been sent or received.
•
full - A valid iSCSI login response with the final bit set has
been sent or received.
•
logout - A valid iSCSI logout command has been sent or
received, but the transport protocol connection has not yet
been closed.
iscsiCxnState is hard coded to value "full".
Read only The type of Internet Network Addresses contained in the
corresponding instances of iscsiCxnLocalAddr and
iscsiCxnRemoteAddr. The value 'dns' is not allowed.
iscsiCxnAddrType is hard coded to the value IPv4.
Read only The local Internet Network Address, of the type specified by
iscsiCxnAddrType, used by this connection.
Read only The transport protocol over which this connection is running. This is
hard coded to tcp (6).
Read only The local transport protocol port used by this connection. This object
cannot have the value zero, since it represents an established
connection. This is hard coded to 3260.
Read only The remote Internet Network Address, of the type specified by
iscsiCxnAddrType, used by this connection.
NOTE: Only IPv4 addresses are supported.
Read only The remote transport protocol port used by this connection. This
object cannot have the value zero, since it represents an
established connection.
Read only The maximum data payload size supported for command or data
PDUs able to be received on this connection.
Fabric OS MIB Reference
53-1002151-01