Brocade Communications Systems Brocade 8/12c Reference page 223

Brocade fabric os mib reference supporting fabric os v7.0.0 (53-1002151-01, april 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

Object and OID
connUnitNumports
1.3.6.1.3.94.1.6.1.4
connUnitState
1.3.6.1.3.94.1.6.1.5
connUnitStatus
1.3.6.1.3.94.1.6.1.6
connUnitProduct
1.3.6.1.3.94.1.6.1.7
connUnitSn
1.3.6.1.3.94.1.6.1.8
Fabric OS MIB Reference
53-1002151-01
Access
Description
Read only
Number of physical ports (between 0 and the maximum number of
system supported ports) in the connectivity unit (external).
The Brocade switches support 0 to maximum number of system
supported ports.
NOTE: The ConnUnitNumports will not count the GE ports present on
the FC4-16IP blade.
The maximum number of supported ports are as follows.
Brocade 300
Brocade 4100
Brocade 4900
Brocade 5000
Brocade 5100
Brocade 5300
Brocade 7500 or 7500E
Brocade 7600
Brocade 7800 Extension Switch
Brocade 8000
Brocade Encryption Switch
Brocade DCX
Brocade DCX-4S
Brocade 48000
Brocade 6510
Brocade DCX 8510-4 Backbone
Brocade DCX 8510-8 Backbone
Read only
Overall state of the connectivity unit.
Possible values are:
unknown (1)
online (2) - Set the state to online.
offline (3) - Set the state to offline.
Mapped as follows:
switchState (ONLINE)
switchState (not ONLINE) 3 (offline, testing,
faulty)
Read only
Overall status of the connectivity unit. This switch status is based on the
most severe status of contributors like Power supplies, Temperatures,
Fans, WWN servers, Standby CP, Blades, Flash, Marginal ports, Faulty
ports, Missing SFPs, and so on. switchStatusPolicyShow command
displays the policy parameters that determines the overall switch status.
Possible values are:
unknown (1) - Unknown
unused (2) - Unmonitored
ok (3) - Healthy/ok
warning (4) - Marginal/Warning
failed (5) - Down/Failed
Read only
The connectivity unit vendor's product model name.
This is the same as for sysDescr (set for as many as 79 bytes).
If the switch is in Access Gateway mode, the default value is Access
Gateway.
Read only
The serial number for this connectivity unit.
Set to the SSN (which by default is the WWN).
Connectivity unit group
24 ports
32 ports
64 ports
32 ports
40 ports
80 ports
32 ports
16 ports
24 ports
32 ports
32 ports
640 ports
320 ports
384 ports
48 ports
320 ports
640 ports
2 (online)
9
203

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.0

Table of Contents