Lldpxdot3 Local Data Group - Brocade Communications Systems Brocade 8/12c Reference

object and OID
lldpXdot3PortConfigEntry
1.0.8802.1.1.2.1.5.4623.1.1.1.
1
lldpXdot3PortConfigTLVsTxEnabl
e
1.0.8802.1.1.2.1.5.4623.1.1.1.
1.1

lldpXdot3 local data group

object and OID
lldpXdot3LocalData
1.0.8802.1.1.2.1.5.462
3.1.2
lldpXdot3LocPortTable
1.0.8802.1.1.2.1.5.462
3.1.2.1
lldpXdot3LocPortEntry
1.0.8802.1.1.2.1.5.462
3.1.2.1.1
lldpXdot3LocPortAutoNe
gSupported
1.0.8802.1.1.2.1.5.462
3.1.2.1.1.1
lldpXdot3LocPortAutoNe
gEnabled
1.0.8802.1.1.2.1.5.462
3.1.2.1.1.2
lldpXdot3LocPortAutoNe
gAdvertisedCap
1.0.8802.1.1.2.1.5.462
3.1.2.1.1.3
lldpXdot3LocPortOperMa
uType
1.0.8802.1.1.2.1.5.462
3.1.2.1.1.4
lldpXdot3LocPowerTable
1.0.8802.1.1.2.1.5.462
3.1.2.2
Fabric OS MIB Reference
53-1002151-01
Access Description
Not The LLDP configuration information that controls the transmission
accessible of IEEE 802.3 organizationally defined TLVs on LLDP transmission
capable ports.
Read-write The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP TLVs
whose transmission is allowed on the local LLDP agent by the
network management. Each bit in the bitmap corresponds to an
IEEE 802.3 subtype associated with a specific IEEE 802.3
optional TLV:
•
The bit macPhyConfigStatus (0) indicates that LLDP agent
should transmit MAC/PHY configuration or status TLV.
•
The bit powerViaMDI (1) indicates that LLDP agent should
transmit Power through MDI TLV.
•
The bit linkAggregation (2) indicates that LLDP agent should
transmit Link Aggregation TLV.
•
The bit maxFrameSize (3) indicates that LLDP agent should
transmit Maximum-frame-size TLV.
Access Description
Not IEEE 802.3 local device information.
accessible
Not This table contains one row per port of Ethernet port information (as a
accessible part of the LLDP 802.3 organizational extension) on the local system
known to this agent.
Not The information about a particular port component.
accessible
Read only The truth value used to indicate whether the given port (associated with
the local system) supports auto-negotiation.
Read only The truth value used to indicate whether port auto-negotiation is enabled
on the given port associated with the local system.
Read only This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which
is associated with the given port on the local system.
Read only An integer value that indicates the operational MAU type of the given port
on the local system.
Not This table contains power Ethernet information of the local system known
accessible to the agent.
NOTE: This table is not supported.
LLDP-EXT-DOT3-MIB
16
291