Revision Number Scalar; Unsupported Tables - Brocade Communications Systems Brocade 8/12c Reference

9

Revision number scalar

TABLE 25
State
rowDestroy (1)
rowInactive (2)
rowActive (3)

Revision number scalar

Object and OID
revisionNumber
1.3.6.1.3.94.3

Unsupported tables

The Connectivity Unit Port Statistics Fabric Table (connUnitPortStatTable) is supported in FOS
v2.6.1, v5.x, and v6.0 and later versions.
Brocade does not support the following:
•
•
•
228
trapRegRowState for Read/Write
Description (Read)
Can never happen.
Indicates that this row does exist but
that traps are not enabled to be sent
to the target.
Indicates that this row exists and that
traps are enabled to be sent to the
target.
Access
Read only
Connectivity Unit Port Statistics Hub Table
Connectivity Unit Port Statistics SCSI Table
Connectivity Unit Port Statistics LAN/WAN Table
Description (Write)
Remove this row from the table.
If the row does not exist and the agent allows writes to
the trap table, then a new row is created. The values of
the optional columns are set to default values. Traps
are not enabled to be sent to the target. If the row
already exists, then traps are disabled from being sent
to the target.
If the row does not exist and the agent allows writes to
the trap table, then a new row is created. The values of
the optional columns are set to default values. Traps
are enabled to be sent to the target. If the row already
exists, then traps are enabled to be sent to the target.
Description
This is the revision number for this MIB. The format of the revision
value is as follows:
0 = High order major revision number
1 = Low order major revision number
2 = High order minor revision number
3 = Low order minor revision number
The value is stored as an ASCII value. The following is the current
value of this object.
0 = 0
1 = 3
2 = 0
3 = 0
This defines a revision of 03.00.
Set to 0300.
Fabric OS MIB Reference
53-1002151-01