Udp Group; Egp Group; Transmission Group; Snmp Group - Brocade Communications Systems Brocade 8/12c Reference

2

UDP group

UDP group
Implementation of the UDP group is mandatory for all systems that implement the UDP.
Object and OID
udpInDatagrams
1.3.6.1.2.1.7.1
udpNoPorts
1.3.6.1.2.1.7.2
udpInErrors
1.3.6.1.2.1.7.3
udpOutDatagrams
1.3.6.1.2.1.7.4
udpTable
1.3.6.1.2.1.7.5
udpEntry
1.3.6.1.2.1.7.5.1
udpLocalAddress
1.3.6.1.2.1.7.5.1.1
udpLocalPort
1.3.6.1.2.1.7.5.1.2

EGP group

Brocade does not support the EGP group. This section is not applicable. For complete information
regarding the EGP group, refer to RFC 1213.

Transmission group

Brocade does not support the Transmission group. This section is not applicable. For complete
information regarding the Transmission group, refer to RFC 1213.

SNMP group

Implementation of the SNMP group is mandatory for all systems that support an SNMP protocol
entity. Some of the objects defined next are zero-valued in those SNMP implementations that are
optimized to support only those functions specific to either a management agent or a management
station. All of the objects that follow refer to an SNMP entity, and there might be several SNMP
entities residing on a managed node (for example, if the node is acting as a management station).
48
Access Description
Read only The total number of UDP datagrams delivered to UDP users.
Read only The total number of received UDP datagrams for which there was no
application at the destination port.
Read only The number of received UDP datagrams that could not be delivered for
reasons other than the lack of an application at the destination port.
Read only The total number of UDP datagrams sent from this entity.
Not The UDP listener table contains information about this entity's UDP
accessible end-points on which a local application is currently accepting datagrams.
Not Information about a particular current UDP listener.
accessible
Read only The local IP address for this UDP listener. In the case of a UDP listener
that is willing to accept datagrams for any IP interface associated with
the node, the value 0.0.0.0 is used.
Read only The local port number for this UDP listener.
Fabric OS MIB Reference
53-1002151-01