Dot1Qvlan Group - Brocade Communications Systems Brocade 8/12c Reference

Object and OID
dot1qStaticMulticastForbid
denEgressPorts
1.3.6.1.2.1.17.7.1.3.2.1.4
dot1qStaticMulticastStatus
1.3.6.1.2.1.17.7.1.3.2.1.5

dot1qVlan group

Object and OID
dot1qVlanCurrentTable
1.3.6.1.2.1.17.7.1.4.2
dot1qVlanCurrentEntry
1.3.6.1.2.1.17.7.1.4.2.1
dot1qVlanTimeMark
1.3.6.1.2.1.17.7.1.4.2.1.1
dot1qVlanIndex
1.3.6.1.2.1.17.7.1.4.2.1.2
dot1qVlanFdbId
1.3.6.1.2.1.17.7.1.4.2.1.3
dot1qVlanCurrentEgressPo
rts
1.3.6.1.2.1.17.7.1.4.2.1.4
dot1qVlanCurrentUntagged
Ports
1.3.6.1.2.1.17.7.1.4.2.1.5
Farbric OS MIB Reference
53-1002151-01
Access Description
Read-write The set of ports to which frames received from a specific port and
destined for a specific multicast or broadcast MAC address must not be
forwarded, regardless of any dynamic information, for example, from
GMRP.
Read-write This object indicates the status of this entry.
Values:
•
other (1) - This entry is currently in use, but the conditions under
which it will remain so differ from the following values.
•
invalid (2) - Writing this value to the object removes the
corresponding entry.
•
permanent (3) - This entry is currently in use and will remain so
after the next reset of the bridge.
•
deleteOnReset (4) - This entry is currently in use and will remain
so until the next reset of the bridge.
•
deleteOnTimeout (5) - This entry is currently in use and will remain
so until it is aged out.
Access Description
Not A table containing current configuration information for each VLAN
accessible currently configured into the device by (local or network) management,
or dynamically created as a result of GVRP requests received.
Not Information for a VLAN configured into the device by (local or network)
accessible management, or dynamically created as a result of GVRP requests
received.
Not A time filter for this entry.
accessible
Not The VLAN ID or other identifier referring to this VLAN.
accessible
Read only The filtering database used by this VLAN.This is one of the dot1qFdbId
values in the dot1qFdbTable. This value is allocated automatically by
the device whenever the VLAN is created: either dynamically by GVRP,
or by management, in dot1qVlanStaticTable.
Read only The set of ports that are transmitting traffic for this VLAN as either
tagged or untagged frames.
Read only The set of ports that are transmitting traffic for this VLAN as untagged
frames.
18
Q-Bridge MIB
323