Lldpxdot1 Local Data Group - Brocade Communications Systems Brocade 8/12c Reference

16
LLDP-EXT-DOT1-MIB
object and OID
lldpXdot1ConfigProtocol
Entry
1.0.8802.1.1.2.1.5.329
62.1.1.4.1
lldpXdot1ConfigProtocolT
xEnable
1.0.8802.1.1.2.1.5.329
62.1.1.4.1.1

lldpXdot1 local data group

object and OID
lldpXdot1LocalData
1.0.8802.1.1.2.1.5.32962.
1.2
lldpXdot1LocTable
1.0.8802.1.1.2.1.5.32962.
1.2.1
lldpXdot1LocEntry
1.0.8802.1.1.2.1.5.32962.
1.2.1.1
lldpXdot1LocPortVlanId
1.0.8802.1.1.2.1.5.32962.
1.2.1.1.1
lldpXdot1LocProtoVlanTable
1.0.8802.1.1.2.1.5.32962.
1.2.2
lldpXdot1LocProtoVlanEntry
1.0.8802.1.1.2.1.5.32962.
1.2.2.1
lldpXdot1LocProtoVlanId
1.0.8802.1.1.2.1.5.32962.
1.2.2.1.1
lldpXdot1LocProtoVlanSupp
orted
1.0.8802.1.1.2.1.5.32962.
1.2.2.1.2
286
Access Description
Not The LLDP configuration information that specifies the set of ports
accessible (represented as a PortList) on which the Local System Protocol instance
will be transmitted.
Read-write The boolean value that indicates whether the corresponding Local System
Protocol Identity instance will be transmitted on the port defined by the
given lldpXdot1LocProtocolEntry. The value of this object must be
restored from non-volatile storage after a re-initialization of the
management system.
Access Description
Not IEEE 802.1 local system information.
accessible
Not This table contains one row per port for IEEE 802.1 organizationally
accessible defined LLDP extension on the local system known to this agent.
Not The information about IEEE 802.1 organizationally defined LLDP
accessible extension.
Read only The integer value used to identify the port's VLAN identifier associated
with the local system. A value of zero shall be used if the system either
does not know the PVID or does not support port-based VLAN
operation. This object displays zero although the TE interfaces are
associated with VLANS.
NOTE: This object takes the value from the PVID sent by NSM. This
PVID is sent from NSM to LLDP only for the untagged frames.
Port VLAN ID or PVID, is used for classifying untagged packets.
For untagged VLAN it can be set in access port, or converged
port using the switchport [access | converged] vlan <vlan_id>
command. All the other VLANs which are tagged will display
zero.
Not This table contains one or more rows per Port and Protocol VLAN
accessible information about the local system.
Not The port and protocol VLAN ID Information about a particular port
accessible component. There may be multiple port and protocol VLANs, identified
by a particular lldpXdot1LocProtoVlanId, configured on the given port.
Not The integer value used to identify the port and protocol VLANs
accessible associated with the given port associated with the local system. A value
of zero shall be used if the system either does not know the protocol
VLAN ID (PPVID) or does not support port and protocol VLAN operation.
Read only The truth value used to indicate whether the given port (associated with
the local system) supports port and protocol VLANs.
Fabric OS MIB Reference
53-1002151-01