Brocade Communications Systems Brocade 8/12c Reference page 113

Object and OID
fcFeModuleFxPortCapacity
1.3.6.1.3.42.2.1.1.4.1.6
fcFeModuleName
1.3.6.1.3.42.2.1.1.4.1.7
fcFxConfTable
1.3.6.1.3.42.2.1.1.5
fcFxConfEntry
1.3.6.1.3.42.2.1.1.5.1
fcFxConfModuleIndex
1.3.6.1.3.42.2.1.1.5.1.1
fcFxConfFxPortIndex
1.3.6.1.3.42.2.1.1.5.1.2
fcFxPortName
1.3.6.1.3.42.2.1.1.5.1.3
fcFxPortFcphVersionHigh
1.3.6.1.3.42.2.1.1.5.1.4
fcFxPortFcphVersionLow
1.3.6.1.3.42.2.1.1.5.1.5
fcFxPortBbCredit
1.3.6.1.3.42.2.1.1.5.1.6
fcFxPortRxBufSize
1.3.6.1.3.42.2.1.1.5.1.7
fcFxPortRatov
1.3.6.1.3.42.2.1.1.5.1.8
fcFxPortEdtov
1.3.6.1.3.42.2.1.1.5.1.9
fcFxPortCosSupported
1.3.6.1.3.42.2.1.1.5.1.10
Fabric OS MIB Reference
53-1002151-01
Access Description
Read only The number of Fx_Port that can be contained within the module.
Within each module, the ports are uniquely numbered in the range
from 1 to fcFeModuleFxPortCapacity, inclusive; however, the numbers
are not required to be contiguous.
Read only The Name_Identifier of the module.
The return value is the WWN of the switch.
Not A table that contains, one entry for each Fx_Port in the fabric element,
accessible configuration and service parameters of the Fx_Ports.
Not An entry containing the configuration and service parameters of an
accessible Fx_Port.
Read only Identifies the module containing the Fx_Port for which this entry
contains information.
Read only Identifies the Fx_Port within the module. This number ranges from 1
to the value of fcFeModulePortCapacity for the associated module.
The value remains constant for the identified Fx_Port until the module
is re-initialized.
Read only The name identifier of this Fx_Port. Each Fx_Port has a unique port
name within the address space of the fabric.
The return value is the WWN of the port.
Read only The highest or most recent version of FC-PH that the Fx_Port is
configured to support.
Read only The lowest or earliest version of FC-PH that the Fx_Port is configured
to support.
Read only The total number of receive buffers available for holding Class 1
connect-request Class 2 or 3 frames from the attached Nx_Port. It is
for buffer-to-buffer flow control in the direction from the attached
Nx_Port (if applicable) to Fx_Port.
Read only The largest Data_Field Size (in octets) for an FT_1 frame that can be
received by the Fx_Port.
Read only The Resource_Allocation_Timeout Value configured for the Fx_Port.
This is used as the time-out value for determining when to reuse an
Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV
(Refer to "fcFxPortEdtov"
that a frame might be delayed within the fabric and still be delivered.
Read only The E_D_TOV value configured for the Fx_Port. The
Error_Detect_Timeout Value is used as the time-out value for
detecting an error condition.
Read only A value indicating the set of Classes of Service supported by the
Fx_Port.
Valid values:
•
Class F (0)
•
Class 1 (1)
•
Class 2 (2)
•
Class 3 (3)
•
Class 4 (4)
•
Class 5 (5)
•
Class 6 (6)
fcFeConfig group
on page 78) plus twice the maximum time
4
93