Connectivity Unit Group - Brocade Communications Systems Brocade 8/12c Reference

Connectivity unit group

Implementation of the connectivity group is mandatory for all systems.
Object and OID
uNumber
1.3.6.1.3.94.1.1
systemURL
1.3.6.1.3.94.1.2
connUnitTable
1.3.6.1.3.94.1.6
connUnitEntry
1.3.6.1.3.94.1.6.1
connUnitId
1.3.6.1.3.94.1.6.1.1
Fabric OS MIB Reference
53-1002151-01
Access Description
Read only The number of connectivity units present on this system (represented by
this agent). Might be a count of the boards in a chassis or the number of
full boxes in a rack.
The connectivity unit is mapped to a switch. uNumber is always set to
one.
Read only The top-level URL of the system; if it does not exist, the value is an empty
string. The URL format is implementation dependant and can have
keywords embedded that are preceded by a percent sign (for example,
%USER).The following are the defined keywords that are recognized and
replaced with data during a launch.
USER Replace with username
PASSWORD Replace with password
GLOBALID Replace with global ID
SERIALNO Replace with serial number
The expected value for system URL.0 is:
http://{a.b.c.d}
where {a.b.c.d} is the IP address of the switch if a Web Tools license is
available.
""(null)
where " " is used when a Web Tools license is not available.
Not A list of units under a single SNMP agent. The number of entries is given
accessible by the value of uNumber. The value is 1 for stand-alone system.
Not A connectivity unit entry containing objects for a particular unit.
accessible
Read only This object indicates the WWN of the switch.
The Brocade implementation maps the switch WWN to the first 8 octets
of this object and sets the remaining 8 octets to 0.

Connectivity unit group

9
201