Brocade Communications Systems Brocade 8/12c Reference page 291

object and OID
dot1xAuthAuthReauthsW
hileAuthenticated
1.0.8802.1.1.1.1.2.3.1.1
0
dot1xAuthAuthEapStarts
WhileAuthenticated
1.0.8802.1.1.1.1.2.3.1.1
1
dot1xAuthAuthEapLogoff
WhileAuthenticated
1.0.8802.1.1.1.1.2.3.1.1
2
dot1xAuthBackendRespo
nses
1.0.8802.1.1.1.1.2.3.1.1
3
dot1xAuthBackendAcces
sChallenges
1.0.8802.1.1.1.1.2.3.1.1
4
dot1xAuthBackendOther
RequestsToSupplicant
1.0.8802.1.1.1.1.2.3.1.1
5
dot1xAuthBackendNonN
akResponsesFromSuppli
cant
1.0.8802.1.1.1.1.2.3.1.1
6
dot1xAuthBackendAuthS
uccesses
1.0.8802.1.1.1.1.2.3.1.1
7
dot1xAuthBackendAuthF
ails
1.0.8802.1.1.1.1.2.3.1.1
8
dot1xAuthSessionStatsT
able
1.0.8802.1.1.1.1.2.4
dot1xAuthSessionStatsE
ntry
1.0.8802.1.1.1.1.2.4.1
Fabric OS MIB Reference
53-1002151-01
Access Description
Read only Counts the number of times that the state machine transitions from
AUTHENTICATED to CONNECTING, as a result of a re-authentication
request (reAuthenticate = TRUE).
Read only Counts the number of times that the state machine transitions from
AUTHENTICATED to CONNECTING, as a result of an EAPOL start
message being received from the supplicant.
Read only Counts the number of times that the state machine transitions from
AUTHENTICATED to DISCONNECTED, as a result of an EAPOL logoff
message being received from the supplicant.
Read only Counts the number of times that the state machine sends an initial
Access-Request packet to the authentication server (for example,
executes sendRespToServer on entry to the RESPONSE state). Indicates
that the authenticator attempted communication with the
authentication server.
Read only Counts the number of times that the state machine receives an initial
Access-Challenge packet from the authentication server (for example,
aReq becomes TRUE, causing exit from the RESPONSE state). Indicates
that the authentication server has communication with the
authenticator.
Read only Counts the number of times that the state machine sends an
EAP-Request packet (other than an Identity, Notification, Failure or
Success message) to the supplicant (for example, executes txReq on
entry to the REQUEST state). Indicates that the authenticator chose an
EAP-method.
Read only Counts the number of times that the state machine receives a response
from the supplicant to an initial EAP-Request, and the response is
something other than EAP-NAK (for example, rxResp becomes TRUE,
causing the state machine to transition from REQUEST to RESPONSE,
and the response is not an EAP-NAK). Indicates that the supplicant can
respond to the authenticator's chosen EAP-method.
Read only Counts the number of times that the state machine receives an
EAP-Success message from the authentication server (for example,
aSuccess becomes TRUE, causing a transition from RESPONSE to
SUCCESS). Indicates that the supplicant has successfully authenticated
to the authentication server.
Read only Counts the number of times that the state machine receives an
EAP-Failure message from the authentication Server (for example, aFail
becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates
that the supplicant has not authenticated to the authentication Server.
Not A table that contains the session statistics objects for the authenticator
accessible PAE associated with each port.
Not The session statistics information for an authenticator PAE. This shows
accessible the current values being collected for each session that is still in
progress, or the final values for the last valid session on each port
where there is no session currently active.
Dot1x PAE authenticator group
15
271