Brocade Communications Systems Brocade 8/12c Reference page 270

12
iSCSI session attributes table
Object and OID
iscsiSsnTargetName
1.3.6.1.2.1.142.1.1.10.1.1.5
iscsiSsnTSIH
1.3.6.1.2.1.142.1.1.10.1.1.6
iscsiSsnISID
1.3.6.1.2.1.142.1.1.10.1.1.7
iscsiSsnInitiatorAlias
1.3.6.1.2.1.142.1.1.10.1.1.8
iscsiSsnTargetAlias
1.3.6.1.2.1.142.1.1.10.1.1.9
iscsiSsnInitialR2T
1.3.6.1.2.1.142.1.1.10.1.1.10
iscsiSsnImmediateData
1.3.6.1.2.1.142.1.1.10.1.1.11
iscsiSsnType
1.3.6.1.2.1.142.1.1.10.1.1.12
iscsiSsnMaxOutstandingR2T
1.3.6.1.2.1.142.1.1.10.1.1.13
iscsiSsnFirstBurstLength
1.3.6.1.2.1.142.1.1.10.1.1.14
iscsiSsnMaxBurstLength
1.3.6.1.2.1.142.1.1.10.1.1.15
iscsiSsnConnectionNumber
1.3.6.1.2.1.142.1.1.10.1.1.16
iscsiSsnAuthIdentity
1.3.6.1.2.1.142.1.1.10.1.1.17
iscsiSsnDataSequenceInOrder
1.3.6.1.2.1.142.1.1.10.1.1.18
iscsiSsnDataPDUInOrder
1.3.6.1.2.1.142.1.1.10.1.1.19
250
Access Description
Read only If iscsiSsnDirection is Outbound, this object is a UTF-8 string that
contains the name of the remote target. If this session is a discovery
session that does not specify a particular target, this object contains
a zero-length string. If scsiSsnDirection is Inbound, this object
contains a zero-length string.
Read only The target-defined handle for this session.
Read only The initiator-defined portion of the iSCSI session ID.
Read only A UTF-8 string that gives the alias communicated by the initiator end
of the session during the log in phase. If no alias exists, the value is
a zero-length string.
Read only A UTF-8 string that gives the alias communicated by the target end
of the session during the log in phase If no alias exists, the value is a
zero-length string.
Read only If set to true, indicates that the initiator must wait for an R2T before
sending to the target. If set to false, the initiator may send data
immediately, within limits set by iscsiSsnFirstBurstLength and the
expected data transfer length of the request.
Read only Indicates whether the initiator and target have agreed to support
immediate data on this session.
Read only Indicates the type of iSCSI session:
•
normalSession - Session is a normal iSCSI session.
•
discoverySession - Session is being used only for discovery.
Read only The maximum number of outstanding requests-to-transmit (R2Ts)
per iSCSI task within this session.
Read only The maximum length supported for unsolicited data sent within this
session.
Read only The maximum number of bytes that can be sent within a single
sequence of Data-In or Data-Out PDUs.
Read only The number of transport protocol connections that currently belong
to this session.
Read only This object contains a pointer to a row in the IPS-AUTH MIB module
that identifies the authentication method being used on this
session, as communicated during the log in phase. The value is set
to null since there is no IPS-AUTH MIB
Read only False indicates that iSCSI data PDU sequences may be transferred
in any order. True indicates that data PDU sequences must be
transferred using continuously increasing offsets, except during
error recovery.The default value for this is True.
Read only False indicates that iSCSI data PDUs within sequences may be in
any order. True Indicates that data PDUs within sequences must be
at continuously increasing addresses, with no gaps or overlay
between PDUs. Default is true.
Fabric OS MIB Reference
53-1002151-01