Rstp Mib - Brocade Communications Systems Brocade 8/12c Reference

Object and OID
dot1qTpVlanPortOutFrame
s
1.3.6.1.2.1.17.7.1.4.6.1.2
dot1qTpVlanPortInDiscards
1.3.6.1.2.1.17.7.1.4.6.1.3
dot1qTpVlanPortInOverflow
Frames
1.3.6.1.2.1.17.7.1.4.6.1.4
dot1qTpVlanPortOutOverflo
wFrames
1.3.6.1.2.1.17.7.1.4.6.1.5
dot1qTpVlanPortInOverflow
Discards
1.3.6.1.2.1.17.7.1.4.6.1.6

RSTP MIB

The Bridge MIB Extension module for managing devices that support the Rapid Spanning Tree
Protocol defined by IEEE 802.1w.
object and OID
dot1dStpVersion
1.3.6.1.2.1.17.2.16
dot1dStpTxHoldCount
1.3.6.1.2.1.17.2.17
dot1dStpExtPortTable
1.3.6.1.2.1.17.2.19
dot1dStpExtPortEntry
1.3.6.1.2.1.17.2.19.1
dot1dStpPortProtocolMig
ration
1.3.6.1.2.1.17.2.19.1.1
dot1dStpPortAdminEdge
Port
1.3.6.1.2.1.17.2.19.1.2
Farbric OS MIB Reference
53-1002151-01
Access Description
Read only The number of valid frames transmitted by this port to its segment from
the local forwarding process for this VLAN. This includes the bridge
management frames originated by this device that are classified as
belonging to this VLAN (for example, GMRP, but not GVRP or STP).
Read only The number of valid frames received by this port from its segment that
were classified as belonging to this VLAN and that were discarded due
to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for
Discard Inbound and Discard on Ingress filtering.
Read only The number of times the associated dot1qTpVlanPortInFrames counter
has overflowed.
Read only The number of times the associated dot1qTpVlanPortOutFrames
counter has overflowed.
Read only The number of times the associated dot1qTpVlanPortInDiscards
counter has overflowed.
Access Description
Read-write The version of Spanning Tree Protocol that the bridge is currently
running.
Values:
•
stpCompatible (0) - Indicates the Spanning Tree Protocol
specified in IEEE 802.1D-1998.
•
rstp (2) - Indicates the Rapid Spanning Tree Protocol specified in
IEEE 802.1w and clause 17 of 802.1D-2004.
Read-write The value used by the port transmit state machine to limit the
maximum transmission rate. The value of this object must be
retained across re-initialization of the management system.
Not accessible A table that contains port-specific Rapid Spanning Tree information.
Not accessible A list of Rapid Spanning Tree information maintained by each port.
Read-write When operating in RSTP (version 2) mode, writing true (1) to this
object forces this port to transmit RSTP BPDUs. Any other operation
on this object has no effect and it always returns false (2) when read.
Read-write The administrative value of the edge port parameter.
•
true (1) - Indicates that this port should be assumed as an edge
port.
•
false (2) - Indicates that this port should be assumed as a non
edge port.
18
RSTP MIB
325