Brocade Communications Systems Brocade 8/12c Reference page 55

Brocade fabric os mib reference supporting fabric os v7.0.0 (53-1002151-01, april 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

Object and OID
ifIndex
1.3.6.1.2.1.2.2.1.1
ifDescr
1.3.6.1.2.1.2.2.1.2
ifType
1.3.6.1.2.1.2.2.1.3
ifMtu
1.3.6.1.2.1.2.2.1.4
ifSpeed
1.3.6.1.2.1.2.2.1.5
Fabric OS MIB Reference
53-1002151-01
Access
Description
Read only
A unique value for each interface.
The values range between 1 and the value of ifNumber. The value for each
interface must remain constant, at least from one re-initialization of the
entity's network management system to the next re-initialization.
For Network Interface, the number starts from 805306369 and increments
with the interface count. For FC ports, the number starts from 1073741824
and increments with the existing FC ports. Similarly the index value range for
the interfaces are as follows:
For GbE port the number starts from 268435456
For Ten GbE (FCoE ports) the number starts from 402653184
For FCIP Tunnel the number starts from 536870912
For xFCIP Tunnel the number starts from 1342177280
For Port channel the number starts from 671088640
For VLAN the number starts from 1207959552
Read only
A textual string containing information about the interface. The ifDescr for
non-bladed switches includes: lo, eth0, and fc0. The ifDescr for Brocade
12000, 24000, and 48000 directors includes: lo, eth0, fc0, and sit0, as well
as fc1, eth0:1, and eth0:2.
Valid values:
For WAN interface - GbE port for FCIP
For transport interface - FCIP tunnel ID
For FC ports - Port name (if set), otherwise, FC port <slot/port>
Read only
The type of interface, designated by the physical link protocols immediately
below the network layer in the protocol stack.
For WAN interface, FCIP Link - ethernetCsmacd (6)
For transport interface - FCIPLink (224)
For FC ports - Fibre Channel (56)
For lo - softwareLoopback (24)
For sit0 - 131
For fc0/port0 - other
Read only
The size of the largest datagram that can be sent or received on the
interface, specified in octets.
For interfaces that are used to transmit network datagrams, the value is the
size of the largest network datagram that can be sent on the interface (these
values are different for Fabric OS v4.x).
eth0 returns 1500
lo returns 16436
fc0 returns 2024
FCIP GbE returns 1500
sit0 returns 1480
port0 returns 2112
Read only
An estimate (in bits per second) of the interface's current bandwidth.
For interfaces that do not vary in bandwidth or interfaces for which no
accurate estimation can be made, this object should contain the nominal
bandwidth. For Fabric OS v4.x, 2 Gbps returns.
eth0 returns 100000000 and not null
fc port returns 1,000,000,000 for 1 Gbps port
fc port returns 2000000000 for 2 Gbps port
fc port returns 4000000000 for 4 Gbps port
For 10G, value displayed is 4294967295
For 8G, value displayed is 4294967295
For 16G, value displayed is 4294967295
2
Interfaces group
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.0

Table of Contents