Fcfeconfig Group - Brocade Communications Systems Brocade 8/12c Reference

4

fcFeConfig group

fcFeConfig group

This group consists of scalar objects and tables. It contains the configuration and service
parameters of the fabric element and the Fx_Ports.
The group represents a set of parameters associated with the fabric element or an Fx_Port to
support its Nx_Ports.
Implementation of this group is mandatory.
Object and OID
fcFabricName
1.3.6.1.3.42.2.1.1.1
fcElementName
1.3.6.1.3.42.2.1.1.2
fcFeModuleCapacity
1.3.6.1.3.42.2.1.1.3
fcFeModuleTable
1.3.6.1.3.42.2.1.1.4
fcFeModuleEntry
1.3.6.1.3.42.2.1.1.4.1
fcFeModuleIndex
1.3.6.1.3.42.2.1.1.4.1.1
fcFeModuleDescr
1.3.6.1.3.42.2.1.1.4.1.2
fcFeModuleObjectID
1.3.6.1.3.42.2.1.1.4.1.3
fcFeModuleOperStatus
1.3.6.1.3.42.2.1.1.4.1.4
fcFeModuleLastChange
1.3.6.1.3.42.2.1.1.4.1.5
92
Access Description
Read only The Name_Identifier of the fabric to which this fabric element
belongs.
This object returns the WWN of the primary switch in the fabric.
Read only The Name_Identifier of the fabric element.
This object returns the WWN of the switch.
Read only The maximum number of modules in the fabric element, regardless of
their current state.
The Brocade 12000, 24000, and 48000 directors do not support this
MIB variable.
The Value for fcFeModuleCapacity is always one for all the supported
switches.
Not A table that contains, one entry for each module in the fabric element,
accessible information of the modules.
Not An entry containing the configuration parameters of a module.
accessible
Read only Identifies the module within the fabric element for which this entry
contains information. This value is never greater than
fcFeModuleCapacity.
Read only A textual description of the module. This value should include the full
name and version identification of the module. It should contain
printable ASCII characters.
Refer to "sysDescr"
Read only The vendor's authoritative identification of the module. This value
might be allocated within the SMI enterprises subtree (1.3.6.1.4.1)
and provides a straight-forward and unambiguous means for
determining what kind of module is being managed.
For example, this object could take the value 1.3.6.1.4.1.99649.3.9
if vendor "Neufe Inc." was assigned the subtree 1.3.6.1.4.1.99649,
and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its
'FeFiFo-16 PlugInCard.'
Refer to "sysObjectID"
Read only Indicates the operational status of the module:
•
online (1) - The module is functioning properly.
•
offline (2) - The module is not available.
•
testing (3) - The module is under testing.
•
faulty (4) - The module is defective in some way.
Read only Contains the value of
current operational status. A value of 0 indicates that the operational
status of the module has not changed since the agent last restarted.
on page 33.
on page 33.
"sysUpTime" when the module entered its
Fabric OS MIB Reference
53-1002151-01