Intergraph StudioZ RenderRAX III System Setup page 61

51
DRAM Refresh Rate
The settings are 15.6 us, 31.2 us, 62.4 us, 124.8 us, and 249.6 us. The Optimal default setting
is 15.6 us.
Memory Hole
This option specifies the location of an area of memory that cannot be addressed on the ISA
bus. The settings are Disabled, 15 MB-16 MB, and 512KB-640KB. The Optimal default
setting is Disabled.
SDRAM RAS# to CAS# delay
The settings are 3 SCLKs, 2 SCLKs, and Auto. The Optimal default setting is 3 SCLKs.
SDRAM RAS# Precharge
The settings are 3 SCLKs, 2 SCLKs, and Auto. The Optimal default setting is 3 SCLKs.
Power Down SDRAM
The Optimal default setting is Enabled.
ACPI Control Register
The Optimal default setting is Disabled.
Gated Clock
The Optimal default setting is Disabled.
Graphics Aperture Size
The settings are 4 MB, 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, and 256 MB. The Optimal
default setting is 64 MB.
Search for MDA Resources
The Optimal default setting is Yes.
AGP Mlti-Trans Timer (AGP Clks)
The settings are Disabled, 32, 64, 96, 128, 160, 192, and 224. The Optimal default setting is
32.