Intergraph StudioZ RenderRAX III System Setup page 30

20
The first time you start the system, it boots to a Microsoft End User License Agreement
(EULA). After reading and accepting the terms of the agreement, follow the instructions to
continue operating system Setup. Take the default settings provided by Setup, except as noted
in the following text. You can set up a user account and join a workgroup or domain after you
configure the video display, the sound processor, and networking.
NOTE Before starting the system for the first time, you may want to learn more about system power,
startup, and shutdown. See Chapter 4, "Operating Notes," for this information.
To start the computer and set up the operating system software:
1. Turn on the monitor by pressing its power switch.
2. Press the Power button on the base unit. The system starts and the EULA displays.
3. Read the terms of the EULA, and then follow the instructions displayed to complete the
Setup process. When prompted, enter the Product Identification Number.
NOTE You must enter the Product Identification Number before you can continue Setup. You cannot
complete Setup if you do not enter this number.
4. Accept the default settings provided by Setup.
Power Button