Unpacking The System - Intergraph StudioZ RenderRAX III System Setup

2

Unpacking the System

Remove everything from the shipping cartons and verify you have the following equipment.
CAUTION Carefully remove items from packaging. Do not drop items on a hard surface, or damage may
result. You will need help to remove and place heavy items.
u
System base unit and power cord.
u
Keyboard (optional) and mouse.
NOTE If you use a concentrator to connect several systems to a single keyboard, mouse, and
monitor, you may not have purchased a keyboard with each system.
u
Rack-mount hardware, including handles, cable ties, rack rails with bar nuts, tinnerman
nuts, and screws.
u
Windows NT operating system software (CD-ROM and diskettes) and documentation.
u
Intergraph system software for Windows NT (diskettes).
If you purchased a monitor from Intergraph Computer Systems, its carton contains the
following:
u
Monitor and power cord.
u
Video cable.
u
Monitor documentation.
NOTE If any of these items were not delivered, call the Customer Response Center immediately at
1-800-633-7248.
Save the packaging materials. If you need to return equipment for repair, it must be in its
original packaging for you to get warranty service.
If you have already unpacked and connected the peripherals to the system, review the rest of
this chapter and then go to Chapter 2, "Setting Up the Soft ware."