Table of Contents
Advertisement
Zeta Alarm Systems.
4 . 2 . 8 P C C o m m u n i c a t i o n s
The Classic 2000 Mk II provides two ways to program the system. In addition to the simple keypad
programming described in this chapter, programming from your PC is also available. If you are
using the Windows 3.1 or higher based software, please follow the instructions below.
To download system, point data and labels from a PC or laptop, select (8.) PC Communications
and plug the PC cable into the programming port on the CP3. Follow the instructions with the soft-
ware to accomplish panel to PC communication and load your programming database. When com-
pleted, press any key and the panel will automatically reset.
NOTE: The PC-3K Programming software and cable is an option and has its own
Operation Manual.
4 . 2 . 9 F a c t o r y D e f a u l t s
The Factory Defaults menu allows you to restore the panel to factory-set default values for all pro-
gramming options (except pass codes). The display will ask you to confirm that you want to reset
the panel. Press 1 to reset and 2 to return to the main menu.
Resetting the panel to factory defaults will clear all edited values.
Revision 1.0
Classic 2000 Mk II Operation Manual
Figure P-36
Figure P-37
Part # MAN-Z3K-01
Page 63
Advertisement
Table of Contents
