Table of Contents
Advertisement
Zeta Alarm Systems.
4 . 2 . 7 . 1 B r o w s e G r o u p
Selecting the (2.) Browse Group option will allow you to step through the output groups one at a
time, viewing the group's characteristics including output group number, floor (if using floor above/
floor below operation), alarm count, and group courtesy label will appear on the screen. While
viewing the output group data, use the PREV and NEXT keys to move between groups. Press
ENTER to forward directly to the edit group menu.
4 . 2 . 7 . 2 E d i t G r o u p
The Edit Group menu allows you to modify the characteristics of each output group in the system
with five options to choose from Enabled, Floor, Cadence, Count and Label . To turn a group on or
off, the user simply presses 1 to toggle between Enabled and Disabled.
To utilize the floor above/floor below operation, press (2.) Floor and enter the floor number for the
output group being edited (refer to Section 5.4.4 for floor above/below programming and opera-
tion). Floor: 00 means the group input is not included in floor above/below operation (floor number
will be dashed out). Any other number will establish it in the floor above/floor below matrix
operation.
Use the (3.) Count menu to establish a multiple alarm group. Each output group has an "alarm
count" property which may be set from 1-9 (default is 1). Each group keeps a count of how many
inputs in that group have gone into alarm. When the number of devices in alarm meets or exceeds
the alarm count for that group, the group is activated. The general alarm group (group 99) always
activates when any alarm occurs.
Press (4.) Label to input or edit a courtesy label for any output group. Once the key is pressed, use
the alphanumeric keypad to edit this 20-character label (the courtesy label displays only when
printing programming, not when the group is activated).
Revision 1.0
Classic 2000 Mk II Operation Manual
Figure P-34
Figure P-35
Part # MAN-Z3K-01
Page 62
Advertisement
Table of Contents
