Table of Contents
Advertisement
Zeta Alarm Systems.
4 . 2
P r o g r a m M e n u s
To begin programming the system using the panel keypad, press the PROG function key. A menu-
based approach allows each of the programmable functions to be selected or bypassed by press-
ing a single key. There are 9 menus found under Program: Clock, System, Network, Inputs, Out-
puts, Points, Groups, PC Communications, and Factory Defaults (illustrated below). The following
sections describe each menu in detail and include an illustration of each main Program
Menu display.
NOTE: When programming, the ESCAPE key allows you to exit any menu at any time with-
out saving the information to the panel's memory and automatically move to the previous
screen. The ENTER key stores the programming selection into the panel's memory and
automatically moves to the next option screen.
4 . 2 . 1 C l o c k
The Clock menu allows you to set the time, date, and time display mode (12- or 24-hour display).
To change either the Time or Date, press the respective number, edit in place, then press ENTER.
Press 3 (Mode) to toggle and select 12- or 24-hour clock modes. Then press ENTER to store the
information in memory.
Revision 1.0
Classic 2000 Mk II Operation Manual
Figures P-5 & P-6
Figure P-7
Part # MAN-Z3K-01
Page 52
Advertisement
Table of Contents
