Installation Procedures; What Do I Have; Installation Sequence - Zeta Classic 2000 MKII Installation And Operation Manual

Zeta Alarm Systems.
NOTES:
1. Space shown for optional ZZRMs above battery storage space may be used to install
the following modules: ZTZB, ZFZA, ZRPC/ZACM combinations, ZCBM, or the ZNDC.
2. To install optional modules, utilize the Snap-Track and installation instructions included
with each module. To install Snap-Track, remove protective covering from self-adhesive
strips on the back of each Snap-Track. Position Snap-Track squarely under the Power
Chassis, and press firmly onto the back of the cabinet. Be sure to leave adequate spac-
ing for a wiring channel and the backup batteries
3. If the battery storage space is not utilized, the batteries must be installed in a separately
Listed fire protective signaling enclosure.
Revision 1.0
Classic 2000 Mk II Operation Manual
Exploded Assembly Figure I-1
Part # MAN-Z3K-01 Page 18