Dle> Shielded Codes Sent To The Modem (Dce); Table 5-3. Supported <Dle> Shielded Codes Sent To The Modem (Dce) - Conexant H08-15355F Reference Manual

5.1.2 <DLE> Shielded Codes Sent to the Modem (DCE)
Table 5-3 lists the supported <DLE> shielded codes sent to the modem in the expression <DLE><code>. The number in
parenthesis in the second column corresponds to the T.50 equivalent.
Table 5-3. Supported <DLE> Shielded Codes Sent to the Modem (DCE)
Code
<DLE>
u
d
p
r
<ETX>
<CAN>
!
^
1118
Command Reference Manual
Code
(1/0) Two contiguous <DLE><DLE> codes indicate a single <DLE> in the data stream
("Immediate Command" or "Stream Command").
(7/5) [Action Numbers 0 and 3] Increase the volume or gain by one unit ("Immediate
Command").
(6/4) [Action Numbers 1 and 4] Decrease the volume or gain by one unit ("Immediate
Command").
(7/0) [Action Number 9] Pause.
(7/2) [Action Number 10] Resume.
(0/3) [Action Number 11] End Voice Transmit State ("Stream Command").
(1/8) [Action Number 12] Clear transmit buffer of voice data ("Immediate Command").
(2/1) [Action Number 15] Receive abort ("Immediate Command").
(5/E) End Voice Duplex State (see +VTR command).
Simple Action Command Description
Conexant
5-3