Fclass - Select Active Service Class; Vcid - Caller Id (Cid) - Conexant H08-15355F Reference Manual

3.2.1.2 +FCLASS - Select Active Service Class

This command selects the active service class (mode).
Syntax
+FCLASS=<mode>
Defined Values
<mode> Decimal number which corresponds to the selected service class.
Result Codes
OK For <mode> = 0, 1, 1.0, 8, and 80 as supported by the .INF File.
ERROR Otherwise.
Reporting Current or Selected Values
Command: +FCLASS?
Response: +FCLASS: <mode>
Example: +FCLASS: 0
Reporting Supported Range of Parameter Values
Command: +FCLASS=?
Response: +FCLASS: (<mode> range)
Example: +FCLASS: (0, 1,1.0,8, 80)

3.2.1.3 +VCID - Caller ID (CID)

This command controls the reporting and presentation of data associated with the Caller ID services in the U.S. and Canada
in the Incoming Call Line ID (ICLID) data format.
Syntax
+VCID=<pmode>
Defined Values
<pmode> Decimal number corresponding to the selected option.
Reporting Current or Selected Values
Command: +VCID?
Response: +VCID: <pmode>
Example: +VCID: 0
Reporting Supported Range of Parameter Values
Command: +VCID=?
Response: +VCID: (<pmode> range)
Example: +VCID: (0,1,2)
3-2
Command Reference Manual
0 Select Data Mode (see Section 3). (Default.)
1 Select Facsimile Class 1 Mode (see Section 4)
1.0 Select Facsimile Class 1.0 Mode (see Section 4)
8 Select Voice Mode (see Section 5)
80 Select VoiceView Mode (see Section 5)
For the default setting.
0 Disable Caller ID reporting. (Default).
1 Enables Caller ID with formatted presentation to the DTE. The modem will present the
data items in a <Tag><Value> pair format. The expected pairs are data, time, caller
code (telephone number), and name.
2 Enables Caller ID with unformatted presentation to the DTE.
For the default setting.
Conexant
1118