Table 3-11. Callcleared Codes From 3.6.4/V.58-1994 - Conexant H08-15355F Reference Manual

Value
0 CauseUnidentified
1 No Previous call
2 Call is still in progress
3 Call Waiting signal detected
4 Delayed
19 InactivityTimerExpired
1F cct108isOffInhibitsDial
20 cct108turnedOff
29 BlacklistedNumber
2A CallAttemptsLimitExceeded
2B ExtensionPhoneOffHook
2C CallSetupFailTimerExpired
2D IncomingCallDetected
2E LoopCurrentInterrupted
2F NoDialTone
31 ReorderTone
33 EngagedTone
34 LongSpaceDisconnect
3C CarrierLost
3D TrainingFailed
3E NoModulationinCommon
3F RetrainFailed
40 RetrainAttemptCountExceeded
41 GstnCleardownReceived
42 FaxDetected
46 InTestMode
50 AnyKeyAbort
51 DteHangupCommand
52 DteResetCommand
5A FrameReject
5B NoErrorControlEstablished
5C ProtocolViolation
5D n400exceeded
5E NegotiationFailed
5F DisconnectFrameReceived
60 SabmeFrameReceived
64 LossOfSynchronization
3-46
Command Reference Manual

Table 3-11. callCleared codes from 3.6.4/V.58-1994

Description
Conexant
Notes
Call setup issues
Not in V.58
Not in V.58
Not in V.58, only if modem can detect it
Same as value 2A, CallAttemptsLimitExceeded
DTR low
DTR drop
Same as "Delayed", see ETS 300 001
If extension detection supported
e.g., S7 timeout
If incoming call while sending dial command.
Fast busy
Busy
And if modem program to abort on long space
Signal Converter
If this was not a fax call attempt
Test
Call Control
If ATH was used to terminate the previous call.
If ATZ was used to terminate the previous call.
Error Control
Error control was required
LAPM retransmission Count Timer
Data Compression
1118