Table 3-3. At#Ud Last Call Status Report Format - Conexant H08-15355F Reference Manual

Key
0 2 digits
1 Table 3-4
2 Table 3-5
3 Table 3-6
4 String
5 String
10 0-2F
11 0-1F
12 0-64
17 0-FFF
18 Table 3-7
20 Table 3-8
21 Table 3-8
22 0-1F40
23 0-1F40
24 0-FA0
25 0-FA0
26 0-FA00
27 0-FA00
30 0-FF
31 0-FF
32 0-FF
33 0-FF
34 0-FA00
35 0-FA00
40 Table 3-9
41 0-400
42 0-FF
43 0-FF
44 Table 3-10
50 0-2
51 0-2
52 0-FFFFFFFF
53 0-FFFFFFFF
54 0-FFFF
55 0-FFFF
56 0-FFFFFFFF
57 0-FFFFFFFF
58 0-FFFF
59 0-FFFF
60 Table 3-11
61 0-FF
1118
Command Reference Manual

Table 3-3. AT#UD Last Call Status Report Format

Value(s)
Diagnostic Command Specification revision number, digit.digit
Call Setup Result code
Multi-media mode
DTE-DCE interface mode
V.8 CM octet string, same format as V.250, in quotes
V.8 JM octet string, same format as V.250, in quotes
Received signal power level, in –dBm (0-43)
Transmit signal power level, in –dBm (e.g., 0-17)
Estimated noise level, in –dBm (e.g., 10-90)
Round Trip delay, in units of ms
V.34 INFO bit map
Transmit Carrier Negotiation Result
Receive Carrier Negotiation Result
Transmit Carrier symbol rate (0-8000) in symbol/s
Receive Carrier symbol rate (0-8000) in symbol/s
Transmit Carrier frequency (0-4000) in Hz
Receive Carrier frequency (0-4000) in Hz
Initial transmit carrier data rate (0-64000) in bit/s
Initial receive carrier data rate (0-64000) in bit/s
Temporary carrier loss event count
Carrier Rate re-negotiation event count
Carrier Retrains requested
Carrier Retrain requests granted
Final transmit carrier data rate in bit/s
Final receive carrier data rate in bit/s
Protocol Negotiation Result
Error Control frame size in bytes
Error control link timeouts in transmission
Error control link NAKs received
Compression Negotiation Result
Transmit flow control: 0 = off; 1 = DC1/DC3; 2 = V.24 ckt 106/133
Receive flow control: 0 = off; 1 = DC1/DC3; 2 = V.24 ckt 106/133
Transmit characters sent from DTE
Received characters sent to DTE
Transmit characters lost (data overrun errors from DTE)
Received characters lost (data overrun errors to DTE)
Transmit I- Frame count, if error control protocol running
Received I-Frame count, if error control protocol running
Transmit I-Frame error count, if error control protocol running
Received I- Frame error count, if error control protocol running
Termination Cause
Call Waiting event count
Definition
Conexant
3-43