Voice Commands; Voice Commands Overview; Table 5-1. Voice Commands - Conexant H08-15355F Reference Manual

5.1 Voice Commands Overview

Voice commands are identified in Table 5-1.
Command
+FCLASS
+VCID
+VNH
+FMI
+FMM
+FMR
+FLO
+VIP
+VRX
+VTR
+VTS
+VTX
+VGR
+VGT
+VIT
+VLS
+VRA
+VRN
+VSD
+VSM
+VTD
+VDR
+VDT
+VBT
+VPR
+VSP
+VDX
+VGM
+VGS
1118
Command Reference Manual

5. VOICE COMMANDS

Table 5-1. Voice Commands

Function
Configuration
Set Mode
Caller ID (CID)
Automatic Hang-up control
Manufacturer Identification
Product Identification
Version, Revision, etc.
Flow Control
Voice
Voice Initialize All Parameters
Start Modem Receive (Record)
Start Voice Transmission and Reception (Duplex)
Voice Tone Send (Send single frequency or DTMF)
Start Modem Transmit (Playback)
Voice Gain Receive (Record Gain)
Voice Gain Transmit (Playback Volume)
Voice Inactivity Timer (DTE/Modem)
Analog Source/Destination Selection
Ringback Goes Away Timer
Ringback Never Appeared Timer
Silence Detection (QUIET & SILENCE)
Compression Method Selection
Beep Tone Duration Timer
Distinctive Ring
Control Tone Cadence Reporting
Buffer Threshold Setting
Select DTE/modem Interface Rate (Turn off autobaud)
Speakerphone
Speakerphone ON/OFF
Speakerphone Duplex Mode
Microphone Gain
Speaker Gain
Conexant
5-1