Table 3-4. Call Setup Result Codes; Table 3-5. Multimedia Modes; Table 3-6. Dte-Dce Modes; Table 3-7. V.34 Info Bit Report - Conexant H08-15355F Reference Manual

Code
0 No previous call (modem log has been cleared since any previous calls)
1 No dial tone detected
2 Reorder signal detected, network busy
3 Busy signal detected
4 No recognized signal detected (e.g., no signal, or nothing recognizable)
5 Voice detected * if this is a voice modem (e.g., V.253) operating in voice mode (e.g., +FCLASS=8.0)
7 Data Answering signal detected (e.g., V.25 ANS, V.8 ANSam)
8 Data Calling signal detected (e.g., V.25 CT, V.8 CI)
9 Fax Answering signal detected (e.g., T.30 CED, DIS)
A Fax Calling signal detected (e.g., T.30 CNG)
B V.8bis signal detected
Code
0 Data Only
1 Fax Only
2 Voice
3 VoiceView
9 Video-telephony, H.324
A Other V.80 call
Code
0 Async data
1 V.80 transparent synchronous mode
2 V.80 framed synchronous mode
Bits
31-30 INFO0 bit 20; 0
20-29 INFOc bits 79-88
16-19 INFOc bits 26-29 or 35-38 or 44-47 or 53-56-
or 62-65 or 71-74
12-15 INFOa bits 26-29
10-11 MP bit 50; 0
0-9 INFOa bits 40-49
3-44
Command Reference Manual

Table 3-4. Call Setup Result Codes

Table 3-5. Multimedia Modes

Table 3-6. DTE-DCE modes

Table 3-7. V.34 INFO bit report

Source bits
Conexant
Definition
Definition
Definition
Definition
Pre-emphasis field, selected by the symbol rate chosen
1118