Ifc - Dte-Modem Local Flow Control; Ilrr - Dte-Modem Local Rate Reporting - Conexant H08-15355F Reference Manual

3.2.2.12 +IFC - DTE-Modem Local Flow Control

This extended-format compound parameter controls the operation of local flow control between the DTE and the modem
during the data state when V.42 error control is used, or when fallback to non-error control mode is specified to include
buffering and flow control. It accepts two numeric subparameters.
Syntax
+IFC=[<modem_by_DTE>[,<DTE_by_modem>]]
Defined Values
<modem_by_DTE> Specifies the method to be used by the DTE to control the flow of received data from the modem.
<DTE_by_modem> Specifies the method to be used by the modem to control the flow of transmitted data from the DTE.
Reporting Current or Selected Values
Command: +IFC?
Response: +IFC: <modem_by_DTE>,<DTE_by_modem>
Example: +IFC: 2,2
Reporting Supported Range of Parameter Values
Command: +IFC=?
Response: +IFC: (<modem_by_DTE> range),(<DTE_by_modem> range)
Example: +IFC: (0-2),(0-2)

3.2.2.13 +ILRR - DTE-Modem Local Rate Reporting

This extended-format numeric parameter controls whether or not the extended-format +ILRR:<rate> information text is
transmitted from the modem to the DTE.
Syntax
+ILRR=<value>
Defined Values
<value> Decimal number corresponding to the selected option.
Reporting Current or Selected Values
Command: +ILRR?
Response: +ILRR: <current value>
Example: +ILRR: 0
Reporting Supported Range of Parameter Values
Command: +ILRR=?
Response: +ILRR: (<value> range)
Example: +ILRR: (0,1)
3-16
Command Reference Manual
0 None.
1 XON/XOFF on transmitted data (XON/XOFF on transmit data); do not pass XON/XOFF
characters to the remote modem.
2 Circuit 133 (Ready for Receiving). (Default.)
0 None.
1 XON/XOFF on received data.
2 CTS/RTS. (Default.)
for the defaults.
0 Disables reporting of local port rate (+ILRR: is not transmitted).
1 Enables reporting of local port rate (+ILRR: is transmitted).
For the default setting
Conexant
1118