Vpr - Select Dte/Modem Interface Rate (Turn Off Autobaud) - Conexant H08-15355F Reference Manual

5.2.2.18 +VPR - Select DTE/Modem Interface Rate (Turn Off Autobaud)

This command selects the DTE/modem interface rate.
Syntax
+VPR=<rate>
Defined Values
<rate>> Decimal number corresponding to the DTE/modem interface rate where 0 = autobaud rate
determined by processing the AT command, and 1,2,3,4,8,16,24,48 correspond to multipliers of 2400
bps to determine the actual rate:
Reporting Current or Selected Values
Command: +VPR?
Response: <rate>
Example: 0
Reporting Supported Range of Parameter Values
Command: +VPR=?
Response: (<rate> range)
Example: (0,1,2,3,4,8,16,24,48)
Result Codes
OK <rate> = 0,1,2,3,4,8,16,24,48.
ERROR Otherwise, or if not in Voice Mode.
1118
Command Reference Manual
0 = Autobaud
1 = 2400 bps
2 = 4800 bps
3 = 7200 bps
4 = 9600 bps
8 = 19200 bps
16 = 38400 bps
24 = 57600 bps
48 = 115200 bps
For the default setting (Autobaud).
Conexant
5-19