Extended Result Codes - Conexant H08-15355F Reference Manual

3.2.2.5 X - Extended Result Codes
This command selects the subset of the result code messages used by the modem to inform the DTE of the results of
commands.
Blind dialing is enabled or disabled by country parameters. If the user wishes to enforce dial tone detection, a "W" can be
placed in the dial string (see D command). The information below is based upon the default implementation of the X results
table. Table 3-1 indicates the messages which are enabled for each X value.
If the modem is in facsimile mode (+FCLASS=1, or 1.0), the only message sent to indicate a connection is CONNECT without
a speed indication.
Syntax
X<value>
Defined Values
<value> Decimal number corresponding to the selected option.
Result Codes
OK
ERROR
1118
Command Reference Manual
0 CONNECT result code is given upon entering online data state. Dial tone and busy
detection reporting are disabled.
1 CONNECT <text> result code is given upon entering online data state. Dial tone and
busy detection reporting are disabled.
2 CONNECT <text> result code is given upon entering online data state. Dial tone
detection reporting is enabled, and busy detection reporting is disabled.
3 CONNECT <text> result code is given upon entering online data state. Dial tone
detection reporting is disabled, and busy detection reporting is enabled.
4 CONNECT <text> result code is given upon entering online data state. Dial tone and
busy detection reporting are both enabled. (Default.)
<value> = 0 to 4.
Otherwise.
Conexant
3-9