Result Codes - Conexant H08-15355F Reference Manual

Command Reference Manual

3.5 RESULT CODES

The modem responds to commands from the DTE and to activity on the line by signaling to the DTE in the form of result
codes. The result codes that the modem can send are described in Table 3-14.
Two forms of each result code are available: long-form, an English-like "verbose" response, and short-form, a data-like
numeric response (included in parentheses following the long-form). The long-form code is preceded and terminated by the
sequence < CR> < LF>. The short-form is terminated by < CR>, only with no preceding sequence.
If result messages are suppressed, nothing is returned to the DTE. The long-form results codes can be modified by the OEM
through the .INF file.
3-57
Conexant
1118