Manual Buttonhole (Option); To Sew - Kenmore 385.16227300 Owner's Manual

Manual Buttonhole (Option)
(_ Stitch selector: _] (BH)
® Stitch width: 3 to 6.5
(_ Stitch length: 0.25 to 1.0
® Needle thread tension: 2 to 6
® Presser foot B: Buttonhole foot
o To sew
If the diameter of the button is more than 1,.0" (2°5 cm), a
buttonhole must be made manually as follows:
[] Turn the handwheel toward you to raise the needle to
its highest position,. Raise the presser foot,
[] Set the stitch at" H" by turning the stitch selector.
[] Attach the buttonhole foot [B]_
[] Pull the buttonhole lever downward as far as it will goo
[]Lower the needle into the garment where the buttonhole
is to start, and lower the foot.
f
\
Q
®
f
[][]
®
i
i
i
i
J
J
[] Sew the front bartack and left row, then stop_
[] Click the buttonhole lever toward you.
[] Sew the back barrack and right row, then stop the
machine at the starting point..
To cut the opening and to reset for sewing the next
buttonhole, refer to instructions[] and [] on
page 80_
J
j
86