Removing The Hook Cover Plate; Inserting The Bobbin - Kenmore 385.16227300 Owner's Manual

o Removing the hook cover plate
_) Hook cover plate release button
(_) Hook cover plate
Slide the hook cover plate release button (_ to the right,
and remove the cover plate (_.
o Inserting the bobbin
(_ End of thread
(_ Notch
Notch
(_ Threading diagram
[] Place a bobbin in the bobbin holder with the thread
running off counterclockwise,
[] Guide the thread into notch(_ on the front side of
the bobbin holder., Draw the thread to the left, sliding it
between the tension spring blades.,
[] Continue to draw the thread lightly until the thread slips
into notch (_. Pull out about 6+' ( 15.0 cm) of thread,
[] Attach the hook cover plate. Check the threading by
referring to the diagram _)shown on the hook cover plate
f
[]
[]
[]
[]
J
/
/]
®
J
\ J
24