Lace Work; Multiple Zigzag Stitch; Seam Finishing; Mending - Kenmore 385.16227300 Owner's Manual

Lace Work
Stitch selector: 10
® Stitch width: 2 to 3
(_) Stitch length: 1
@ Needle thread tension: ! to 4
® Presser foot A: Zigzag foot
Lace adds a fanciful, feminine touch to blouses and
lingerie_ Table linens and pillows become more elegant
when trimmed with lace.
Fold the raw edge of the fabric at least 5/8" (1 _,5 cm).. Place
lace underneath and topstitch with blind hem stitch_ Trim
excess fabric close to stitching..
f
f
Q
®
_|_ wlt_t!
®
®
J
Multiple Zigzag Stitch
(_ Stitch selector: 4
® Stitch width: 5 to 6_5
L_ Stitch length: 0_5 to t
® Needle thread tension: 2 to 6
® Presser foot A: Zigzag foot
o Seam finishing
This stitch is used to finish the seam allowance on
synthetics and other fabrics that tend to pucker, The stitch
is also excellent for darning and mending tears,.
Place your fabric to allow a 5/8" (1 o5 cm) seam_ Trim
excess close to stitching° Be careful not to cut the stitches.
f
®
( ®®
®
J
° Mending
Position the tear under the needle so that the stitch
catches both sides
/
J
6O