Manual Buttonhole - Kenmore 385.18630 Owner's Manual

Manual Buttonhole
0 Stitch selector: H
(_) Stitch width: 3 to 6.5
(_ Stitch length: Blue zone
(_) Needle thread tension: 2 to 6
(_) Presser foot B: Buttonhole foot
= Manual Buttonhole
* If the diameter of the button is more than 1.0"(2.5 cm), a
buttonhole must be made manually as follows:
[] Turn the handwheel toward you to raise the needle to its
highest posiiion. Raise the presser foot lifter.
[] Set the stitch at "I]" by turning the stitch selector.
* If the stitch is already on at "H" reset the machine in
accordance with the instructions on page 76.
[] Attach the buttonhole foot (B).
[] Pull the buttonhole lever downward as far as it will go.
[] Lower the needle into the garment where the buttonhole
is to start, and lower the foot.
[] Sew the front bartack and left row, then stop the machine
after sewing the desired total length of buttonhole.
[] Pull the buttonhole lever toward you.
[] Sew the back barrack and right row, then stop the ma
chine at the starting point.
* To cut the opening and to reset for sewing the next
buttonhole, refer to the instructions on page 76.
_ WIDTH @
®
®
I
I
qb
..o°O,'"
f
@m
[]
)
J
J
"i
82