Manual Buttonhole (Option); To Sew - Kenmore 385.162213 Owner's Manual

Manual Buttonhole
(Option)
(_ Stitch selector: _] (BH)
_) Stitch width: 3 to 65
® Stitch length: 0.25 to 1.0
(_ Needle thread tension: 2 to 6
® Presser foot B: Buttonhole foot
o To sew
If the diameter of the button is more than 1.0" (25 cm), a
buttonhole must be made manually as follows:
[_ Turn the handwheel toward you to raise the needle to
its highest position Raise the presser foot.
[] Set the stitch at "_]" by turning the stitch selector.
[] Attach the buttonhole foot [B]
[] Pull the buttonhole lever downward as far as it will go.
[]Lower the needle into the garment where the buttonhole
is to start, and lower the foot
[] Sew the front bartack and left row, then stop.
[] Click the buttonhole lever toward you,
[] Sew the back bartack and right row, then stop the
machine at the starting point.
To cut the opening and to reset for sewing the next
buttonhole, refer to instructions [] and [] on
page 8&
f
l C -fl®
( ® 1®
®
\
f
i
i
®
f
[]
J
J
J
J
"-- j
82