The Ftp Screen - ZyXEL Communications P-2612HW-F1 User Manual

Table 115 Advanced > Remote Management > Telnet
LABEL
Secured Client
IP
Apply
Cancel

20.4 The FTP Screen

You can use FTP (File Transfer Protocol) to upload and download the ZyXEL
Device's firmware and configuration files, please see the User's Guide chapter on
firmware and configuration file maintenance for details. To use this feature, your
computer must have an FTP client.
To change your ZyXEL Device's FTP settings, click Advanced > Remote MGMT >
FTP. The screen appears as shown. Use this screen to specify which interfaces
allow FTP access and from which IP address the access can come.
Figure 199 Advanced > Remote Management > FTP
The following table describes the labels in this screen.
Table 116 Advanced > Remote Management > FTP
LABEL
Port
Access Status
P-2612HW-F1 User's Guide
DESCRIPTION
A secured client is a "trusted" computer that is allowed to communicate
with the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this
service.
Choose Selected to just allow the computer with the IP address that you
specify to access the ZyXEL Device using this service.
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
Chapter 20 Remote Management
363