ZyXEL Communications P-2612HW-F1 User Manual page 457

Table 164 Power Adaptor Specifications (continued)
EUROPEAN PLUG
STANDARDS
AC Power Adapter Model
Input Power
UNITED KINGDOM PLUG
STANDARDS
AC Power Adapter Model
Input Power
Wall-mounting Instructions
Do the following to hang your ZyXEL Device on a wall.
Note: See Table 159 on page 447
place them.
Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
1
Drill two holes for the screws. Make sure the distance between the centers of the
2
holes matches what is listed in the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the
wall when drilling holes for the screws.
Do not screw the screws all the way into the wall. Leave a small gap of about 0.5
3
cm between the heads of the screws and the wall.
Make sure the screws are snugly fastened to the wall. They need to hold the
4
weight of the ZyXEL Device with the connection cables.
Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang
5
the ZyXEL Device on the screws.
Figure 250 Wall-mounting Example
P-2612HW-F1 User's Guide
MV18-Y180100-C5
230V~50Hz 0.5A
MV18-Y180100-B2
230V~50Hz 0.5A
for the size of screws to use and how far apart to
Chapter 28 Product Specifications
457