Restart; Using Ftp Or Tftp To Back Up Configuration; Using The Ftp Commands To Back Up Configuration - ZyXEL Communications P-2612HW-F1 User Manual

Chapter 25 Tools

25.4 Restart

System restart allows you to reboot the ZyXEL Device without turning the power
off.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device
reboot. This does not affect the ZyXEL Device's configuration.
Figure 240 Maintenance > Tools > Restart Screen
25.5 Using FTP or TFTP to Back Up
Configuration
This section covers how to use FTP or TFTP to save your device's configuration file
to your computer.

25.5.1 Using the FTP Commands to Back Up Configuration

Launch the FTP client on your computer.
1
Enter "open", followed by a space and the IP address of your ZyXEL Device.
2
Enter your username as requested (the default is "admin").
3
Press [ENTER] when prompted for a password.
4
Enter "bin" to set transfer mode to binary.
5
Use "get" to transfer files from the ZyXEL Device to the computer, for example,
6
"get rom-0 config.rom" transfers the configuration file on the ZyXEL Device to
your computer and renames it "config.rom". See earlier in this chapter for more
information on filename conventions.
Enter "quit" to exit the ftp prompt.
7
428
P-2612HW-F1 User's Guide