ZyXEL Communications P-2612HW-F1 User Manual page 191

Table 47 VoIP > SIP > SIP Settings
LABEL
REGISTER
Server Address
REGISTER
Server Port
SIP Service
Domain
Send Caller ID
Authentication
User Name
Password
Apply
Cancel
Advanced Setup Click this to edit the advanced settings for this SIP account. The
P-2612HW-F1 User's Guide
DESCRIPTION
Enter the IP address or domain name of the SIP register server, if your
VoIP service provider gave you one. Otherwise, enter the same address
you entered in the SIP Server Address field. You can use up to 95
printable ASCII characters.
Enter the SIP register server's listening port number, if your VoIP
service provider gave you one. Otherwise, enter the same port number
you entered in the SIP Server Port field.
Enter the SIP service domain name. In the full SIP URI, this is the part
after the @ symbol. You can use up to 127 printable ASCII Extended
set characters.
Select this if you want to send identification when you make VoIP phone
calls. Clear this if you do not want to send identification.
Enter the user name for registering this SIP account, exactly as it was
given to you. You can use up to 95 printable ASCII characters.
Enter the user name for registering this SIP account, exactly as it was
given to you. You can use up to 95 printable ASCII Extended set
characters.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
Advanced SIP Setup screen appears.
Chapter 10 Voice
191