Trusted Cas - ZyXEL Communications P-2612HW-F1 User Manual

Chapter 15 Certificates
Table 93 Security > Certificates > My Certificates > Create (continued)
LABEL
CA Certificate
Request
Authentication
Key
Back
Apply
Cancel
After you click Apply in the My Certificate Create screen, you see a screen that
tells you the ZyXEL Device is generating the self-signed certificate or certification
request.
After the ZyXEL Device successfully enrolls a certificate or generates a certification
request or a self-signed certificate, you see a screen with a Return button that
takes you back to the My Certificates screen.
If you configured the My Certificate Create screen to have the ZyXEL Device
enroll a certificate and the certificate enrollment is not successful, you see a
screen with a Return button that takes you back to the My Certificate Create
screen. Click Return and check your information in the My Certificate Create
screen. Make sure that the certification authority information is correct and that
your Internet connection is working properly if you want the ZyXEL Device to
enroll a certificate online.

15.5 Trusted CAs

Click Security > Certificates > Trusted CAs to open the Trusted CAs screen.
This screen displays a summary list of certificates of the certification authorities
that you have set the ZyXEL Device to accept as trusted. The ZyXEL Device
accepts any valid certificate signed by a certification authority on this list as being
306
DESCRIPTION
Select the certification authority's certificate from the CA
Certificate drop-down list box.
You must have the certification authority's certificate already
imported in the Trusted CAs screen. Click Trusted CAs to go to the
Trusted CAs screen where you can view (and manage) the ZyXEL
Device's list of certificates of trusted certification authorities.
When you select Create a certification request and enroll for a
certificate immediately online, the certification authority may
want you to include a reference number and key to identify you
when you send a certification request. Fill in both the Reference
Number and the Key fields if your certification authority uses CMP
enrollment protocol. Just fill in the Key field if your certification
authority uses the SCEP enrollment protocol.
Type the key that the certification authority gave you.
Click Back to return to the previous screen.
Click Apply to begin certificate or certification request generation.
Click Cancel to quit and return to the My Certificates screen.
P-2612HW-F1 User's Guide